Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Flash Electrically Erasable Programmable Read Only Memory (EEPROM)
The flash EEPROM is an integrated circuit (IC) within the powertrain control module (PCM) and the fuel injection control module (FICM). This integrated circuit contains the software code required by the PCM to control the powertrain and by the FICM to control the fuel injectors. One feature of the flash EEPROM is that it can be electrically erased and then reprogrammed without removing the PCM or the FICM from the vehicle. If a software change is required to the PCM or the FICM, the modules no longer need to be replaced, but can be reprogrammed. The reprogramming is carried out through the data link connector (DLC).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.