Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2011JETTA TDI, 4D SEDAN, AUTOMATIC DCTREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALMECHANICAL2.0L - ENGINE ASSEMBLY - ENGINE CODE: CJAA (SEDAN)10 ENGINE ASSEMBLYDESCRIPTION AND OPERATIONSUBFRAME MOUNTS OVERVIEW
2011 Volkswagen Jetta TDI, 4D Sedan, Automatic DCT
SUBFRAME Mounts Overview
2011 Volkswagen Jetta TDI, 4D Sedan, Automatic DCTSECTION SUBFRAME Mounts Overview
- Bolt
- Transmission support to transmission.
- With a manual transmission, refer to [For transmission(s) 02Q] Special Tools or [For transmission(s) 02E] Special Tools .
- With a DSG®, refer to Special Tools .
- Transmission support to transmission.
- Bolts
- 50 Nm + an additional 90° (1/4) turn
- Replace after removing.
- Pendulum supports to transmission.
- Engine Support
- Bolt
- 40 Nm + an additional 180° (1/2) turn
- Engine support to engine.
- Replace after removing.
- Engine Mount
- Removing and Installing. Refer to ENGINE MOUNT AND BRACKET .
- Bolt
- 40 Nm + an additional 90° (1/4) turn
- Replace after removing.
- Engine mount to body.
- Bracket
- Bolt
- 20 Nm + an additional 90° (1/4) turn
- Replace after removing.
- Bracket to engine mount.
- Bolt
- 20 Nm + an additional 90° (1/4) turn
- Replace after removing.
- Bracket to body.
- Bolt
- 40 Nm + an additional 90° (1/4) turn
- Replace after removing.
- Engine mount to body.
- Bolts
- 60 Nm + an additional 90° (1/4) turn
- Replace after removing.
- Engine mount to engine support.
- Pendulum Support
- First install pendulum support to the transmission and then to the subframe.
- Bolt
- 100 Nm + an additional 90° (1/4) turn
- Replace after removing.
- Pendulum supports to subframe.
- Bolt
- 60 Nm + an additional 90° (1/4) turn
- Transmission mount to transmission support.
- Replace after removing.
- Bolt
- 40 Nm + an additional 90° (1/4) turn
- Replace after removing.
- Transmission mount to body.
- Transmission Mount
- The graphic shows the DSG® transmission version.
- Bolt
- Transmission support to transmission.
- With a manual transmission, refer to [For transmission(s) 02Q] Special Tools or [For transmission(s) 02E] Special Tools .
- With a DSG®, refer to Special Tools .
- Transmission support to transmission.
- Transmission Mount Bracket
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.