Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2011JETTA TDI, 4D SEDAN, AUTOMATIC DCTREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALCOMPONENT LOCATIONSELECTRICAL COMPONENT LOCATIONS -- JETTA SEDANCOMP. LOC.: VEHICLE FRONTENGINE2.5L FSI, CBTA/CBUA FRONT
2011 Volkswagen Jetta TDI, 4D Sedan, Automatic DCT
2.5L FSI, CBTA/CBUA Front
2011 Volkswagen Jetta TDI, 4D Sedan, Automatic DCTSECTION 2.5L FSI, CBTA/CBUA Front
- 1 - Generator with voltage regulator -CX1-
- 2 - Intake air temperature sensor -G42-
- 2 - Manifold absolute pressure sensor -G71-
- 3 - Throttle valve control module -J338-
- 3 - EPC throttle drive -G186-
- 3 - EPC throttle drive angle sensor 2 -G188-
- 3 - Throttle position sensor -G69-
- 4 - Camshaft adjustment valve 1 -N205-
- 5 - 14-pin connector -T14-
- 6 - Oil pressure switch -F1-
- 7 - Reduced oil pressure switch -F378-
- 8 - Oil pressure regulation valve -N428-
- 9 - Engine speed sensor -G28-
- 10 - Engine preheating element -Z97-
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.