Special Tools

2011 Volkswagen Golf Base, 2D Hatchback, 2.5 A, StandardSECTION Special Tools

Special tools and workshop equipment required 

  • Evaporative Emissions Tester KLI 9210
  • Adapter for EVAP. Tester KLI 9210/55-1
  • Fuel Extracting Device VAS 5190
    Fig 1: Identifying Fuel Siphoning Unit VAS 5190
    GWWW00-1107Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  • Adapter Set for Fuel Extraction VAS 5190/10
    Fig 2: Identifying Adapter Set For Fuel Extraction VAS 5190/10
    GWWW00-10666Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  • Test Instrument Adapter/DSO (5-pin) VAS 5565
    Fig 3: Identifying Test Instrument Adapter/DSO (5-pin) VAS 5565
    GWWW00-10599Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  • Lever -T10468-
    Fig 4: Identifying Lever -T10468-
    GWWW00-10979Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  • Hose Clamps up to 25 mm Dia. 3094
    Fig 5: Identifying Hose Clamps 3094
    GWWW00-0079Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  • Turbocharger Tester V.A.G 1397A
    Fig 6: Identifying Turbocharger Tester V.A.G 1397 A
    GWWW00-0565Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  • Release Tool T10238
    Fig 7: Identifying Release Tool T10238
    GWWW00-10110Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  • Torque Wrench (5-50 Nm) V.A.G 1331
    Fig 8: Identifying Torque Wrench (5 To 50 Nm) V.A.G 1331
    GWWW00-0427Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  • Engine-/Gearbox Jack V.A.G 1383 A
    Fig 9: Identifying Engine & Transmission Jack VAG 1383 A
    GWWW00-0120Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Fig 10: Identifying Fuel Supply Special Tools
GWWW20-10041Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

  • Pressure Tester VAS 6550
  • Remote Control V.A.G 1348/3A
  • Test Instrument Adapter/DSO (5-pin) VAS 5565
  • Multi-meter V.A.G 1715
  • Wrench T10202
  • Torque Wrench (40-200 Nm) V.A.G 1332
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.