Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Towing Recognition Control Module -J345-, Coding
Special tools and workshop equipment required
- Trailer Socket Tester VAS 5800
- Power Outlet Tester V.A.G 1537/A
- Vehicle Diagnostic Tester
This test program is used to code the towing recognition control module.
-- Connect the Vehicle Diagnostic Tester. Refer to Description and Operation .
-- On the Vehicle Diagnostic Tester, select "Guided Fault Finding".
-- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
- Body
- Body repair procedures
- Towing sensor
- Functions
- Coding Control Module for towing sensor
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.