Passenger Occupant Detection System Control Module Connector End View (J706, T18e)

2011 Volkswagen Golf Base, 2D Hatchback, 2.5 A, StandardSECTION Passenger Occupant Detection System Control Module Connector End View (J706, T18e)
Fig 1: Passenger Occupant Detection System Control Module Connector End View (J706, T18e)
G10376396
Cavity Function
1 ...
2 ...
3 ...
4 Seat belt force sensor signal
5 Ground (in harness)
6 Pressure sensor signal
7 Pressure sensor supply voltage
8 ...
9 Ignition Supply Voltage
10 ...
11 ...
12 ...
13 ...
14 Seat belt force sensor ground
15 Pressure sensor ground
16 Seat belt force sensor supply voltage
17 Redundant signal ground (optional)
18 Line bus (optional)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.