Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2011GOLF BASE, 2D HATCHBACK, 2.5 A, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESMECHANICAL - HYDRAULICMECHANICAL COMPONENTS - BRAKE SYSTEM46 MECHANICAL COMPONENTSSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2011 Volkswagen Golf Base, 2D Hatchback, 2.5 A, Standard
Fastener Tightening Specifications
2011 Volkswagen Golf Base, 2D Hatchback, 2.5 A, StandardSECTION Fastener Tightening Specifications
| Component | Fastener Size | Nm | ||||||
|---|---|---|---|---|---|---|---|---|
| Brake Pedal Mounting Bracket to Front of Dash/Brake Fluid Reservoir Nut 1 | - | 25 | ||||||
| Brake Pedal to Mounting Bracket Through Bolt Nut 1 | - | 25 | ||||||
| Parking Brake Lever to Body Nut | - | 15 | ||||||
| Front Brakes | ||||||||
| ABS Speed Sensor to Wheel Bearing Housing Bolt 2 | - | 8 | ||||||
| Bracket to Brake Caliper Bolt 3 | - | 15 | ||||||
| Bracket to Wheel Bearing Housing Bolt 3 | - | 8 | ||||||
| Brake Caliper to Brake Carrier Guide Pin | - | 30 | ||||||
| Brake Carrier to Wheel Bearing Housing Bolt 2 | - | 190 | ||||||
| Brake Carrier to Wheel Bearing Housing Bolt 3 | - | - | ||||||
| - First Step | - | 15 | ||||||
| - Second step | - | 200 | ||||||
| Brake Hose to Brake Caliper Banjo Bolt 2 | - | 35 | ||||||
| Brake Line to Brake Caliper Fitting 3 | - | 14 | ||||||
| Brake Rotor to Wheel Hub with Bearing Bolt | - | 4 | ||||||
| Cover Plate to Wheel Bearing Housing Bolt 2 | - | 12 | ||||||
| Vibration Damper to Brake Caliper Bolt 3 | - | 10 | ||||||
| Rear Brakes | ||||||||
| ABS Wheel Speed Sensor to Wheel Bearing Housing Bolt | - | 8 | ||||||
| Brake Caliper to Brake Carrier Bolt 1 | - | 35 | ||||||
| Brake Carrier to Wheel Bearing Housing Bolt 1 | - | 90 + 90 ° turn | ||||||
| Brake Line/Hose to Brake Caliper Fitting | - | 14 | ||||||
| Brake Rotor to Wheel Hub with Bearing Bolt/Screw | - | 4 | ||||||
| Cover Plate to Wheel Bearing Housing Bolt | - | 12 | ||||||
|
||||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.