Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2010ROUTAN SREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSTRANSMISSION DTC BASED DIAGNOSTICS (P0122 TO P084B)
2010 Volkswagen Routan S
Transmission DTC Based Diagnostics (P0122 To P084B)
2010 Volkswagen Routan SSECTION Transmission DTC Based Diagnostics (P0122 To P084B)
- 00 General, Technical Data
- Automatic Transmission 62TE
- P0122 - TPS/APP Circuit Low
- P0123 - TPS/APP Circuit High
- P0124 - TPS/APP Intermittent
- P0218 - High Temperature Operation Activated
- P0562 - Battery Voltage Low
- Notes
- Test Step 1 - Check For Related Charging System DTCS
- Test Step 2 - Check For TIPM DTCS
- Test Step 3 - Condition P0562 Present
- Test Step 4 - Check The (Z901) Ground Circuits For An Open
- Test Step 5 - Check The (T16) Transmission Control Output Circuit For An Open
- Test Step 6 - Check The Wiring And Connectors
- P0602 - Control Module Programming Error/Not Programmed
- P0604 - Internal Control Module RAM
- P0605 - Internal Control Module ROM
- P0613 - Internal Transmission Processor
- P0706 - Transmission Range Sensor Rationality
- P0711 - Transmission Temperature Sensor Performance
- P0712 - Transmission Temperature Sensor Low
- Notes
- Test Step 1 - Determine If Related DTCS Are Present
- Test Step 2 - Check If The DTC Is Active
- Test Step 3 - Check The PCM And Wiring With The Transmission Simulator
- Test Step 4 - Check The (T54) Transmission Temperature Sensor Signal Circuit For A Short To Ground
- Test Step 5 - Check The Wiring And Connectors
- P0713 - Transmission Temperature Sensor High
- Notes
- Test Step 1 - Check To See If DTC Is Current
- Test Step 2 - Check The PCM And Wiring With The Transmission Simulator
- Test Step 3 - Check The (T54) Transmission Temperature Signal Circuit For An Open
- Test Step 4 - Check The (K900) Sensor Ground Circuit For An Open
- Test Step 5 - Check The (T54) Transmission Temperature Sensor Signal Circuit For A Short To Voltage
- Test Step 6 - Check The Wiring And Connectors
- P0714 - Transmission Temperature Sensor Intermittent
- P0716 - Input Speed Sensor 1 Circuit Performance
- Notes
- Test Step 1 - Check To See If DTC P0716 Is Current
- Test Step 2 - Check The PCM And Wiring With The Transmission Simulator
- Test Step 3 - Check The (T52) Input Speed Signal Circuit For An Open
- Test Step 4 - Check The (T13) Speed Sensor Ground Circuit For An Open
- Test Step 5 - Check The (T52) Input Speed Signal Circuit For A Short To Ground
- Test Step 6 - Check The (T52) Input Speed Signal Circuit For A Short To Voltage
- Test Step 7 - Check The (T13) Speed Sensor Ground Circuit For A Short To Voltage
- Test Step 8 - Check The Wiring And Connectors
- P0721 - Output Speed Sensor Circuit Performance
- Notes
- Test Step 1 - Check If The DTC Is Current
- Test Step 2 - Check The PCM And Wiring Using The Transmission Simulator
- Test Step 3 - Check The (T14) Output Speed Sensor Signal Circuit For An Open
- Test Step 4 - Check The (T13) Speed Sensor Ground Circuit For An Open
- Test Step 5 - Check The (T14) Output Speed Signal Circuit For A Short To Ground
- Test Step 6 - Check The (T14) Output Speed Signal Circuit For A Short To Voltage
- Test Step 7 - Check The (T13) Speed Sensor Ground Circuit For A Short To Voltage
- Test Step 8 - Check The Wiring And Connectors
- P0726 - Engine Speed Input Circuit Range/Performance
- P0729 - Gear Ratio Error In 6th
- P0731 - Gear Ratio Error In 1st
- P0732 - Gear Ratio Error In 2nd
- P0733 - Gear Ratio Error In 3rd
- P0734 - Gear Ratio Error In 4th
- P0735 - Gear Ratio Error In 5th
- P0736 - Gear Ratio Error In Reverse
- P0740 - TCC Out Of Range
- P0750 - L/R Solenoid Circuit
- Notes
- Test Step 1 - Check If TIPM TCM DTCS Are Present
- Test Step 2 - Check If The DTC Is Current
- Test Step 3 - Check The PCM And Wiring Using The Transmission Simulator
- Test Step 4 - Check Wiring Using The Transmission Simulator
- Test Step 5 - Check The (T20) L/R Solenoid Control Circuit For An Open
- Test Step 6 - Check The (T20) L/R Solenoid Control Circuit For A Short To Ground
- Test Step 7 - Check The (T20) L/R Solenoid Control Circuit For A Short To Voltage
- Test Step 8 - Intermittent Wiring And Connectors
- P0755 - 2/4 Solenoid Circuit
- Notes
- Test Step 1 - Check If Related TIPM TCM DTCS Are Present
- Test Step 2 - Check To See If The DTC Is Current
- Test Step 3 - Check The PCM And Wiring Using The Transmission Simulator
- Test Step 4 - Check Wiring Using The Transmission Simulator
- Test Step 5 - Check The (T19) 2/4 Solenoid Control Circuit For An Open
- Test Step 6 - Check The (T19) 2/4 Solenoid Control Circuit For A Short To Ground
- Test Step 7 - Check The (T19) 2/4 Solenoid Control Circuit For A Short To Voltage
- Test Step 8 - Check The Wiring And Connectors
- P075A - LC Solenoid Circuit
- Notes
- Test Step 1 - Check If TIPM TCM DTCS Are Present
- Test Step 2 - Check If The DTC Is Current
- Test Step 3 - Check The PCM And Wiring Using The Transmission Simulator
- Test Step 4 - Check Wiring Using The Transmission Simulator
- Test Step 5 - Check The (T80) LC Solenoid Control Circuit For An Open
- Test Step 6 - Check The (T80) LC Solenoid Control Circuit For A Short To Ground
- Test Step 7 - Check The (T80) LC Solenoid Control Circuit For A Short To Voltage
- Test Step 8 - Check The Wiring And Connectors
- P0760 - OD Solenoid Circuit
- Notes
- Test Step 1 - Check If Related TCM DTCS Are Present
- Test Step 2 - Check If DTC Is Current
- Test Step 3 - Check The PCM And Wiring Using The Transmission Simulator
- Test Step 4 - Check Wiring Using The Transmission Simulator
- Test Step 5 - Check The (T60) OD Solenoid Control Circuit For An Open
- Test Step 6 - Check The (T60) OD Solenoid Control Circuit For A Short To Ground
- Test Step 7 - Check The (T60) OD Solenoid Control Circuit For A Short To Voltage
- Test Step 8 - Check The Wiring And Connectors
- P0765 - UD Solenoid Circuit
- Notes
- Test Step 1 - Check If Related TCM DTCS Are Present
- Test Step 2 - Check If The DTC Is Current
- Test Step 3 - CHECK THE PCM AND WIRING USING THE TRANSMISSION SIMULATOR
- Test Step 4 - Check Wiring Using The Transmission Simulator
- Test Step 5 - Check The (T59) UD Solenoid Control Circuit For An Open
- Test Step 6 - Check The (T59) UD Solenoid Control Circuit For A Short To Ground
- Test Step 7 - Check The (T59) UD Solenoid Control Circuit For A Short To Voltage
- Test Step 8 - Check The Wiring And Connectors
- P076A - DC Solenoid Circuit
- Notes
- Test Step 1 - Check If Related DTCS Are Present
- Test Step 2 - Check If The DTC Is Current
- Test Step 3 - Check The PCM And Wiring Using The Transmission Simulator
- Test Step 4 - Check Wiring Using The Transmission Simulator
- Test Step 5 - Check The (T82) DC Solenoid Control Circuit For An Open
- Test Step 6 - Check The (T82) DC Solenoid Control Circuit For A Short To Ground
- Test Step 7 - Check The (T82) DC Solenoid Control Circuit For A Short To Voltage
- Test Step 8 - Check The Wiring And Connectors
- P0791 - Transfer Speed Sensor Circuit
- Notes
- Test Step 1 - Check If The DTC Is Current
- Test Step 2 - Check The PCM And Wiring Using The Transmission Simulator
- Test Step 3 - Check The (T85) Transfer Speed Signal Circuit For An Open
- Test Step 4 - Check The (T13) Speed Sensor Ground Circuit For An Open
- Test Step 5 - Check The (T85) Transfer Speed Sensor Signal Circuit For A Short To Ground
- Test Step 6 - Check The (T85) Transfer Speed Sensor Signal Circuit For A Short To Voltage
- Test Step 7 - Check The (T13) Speed Sensor Ground Circuit For A Short To Voltage
- Test Step 8 - Check The Wiring And Connectors
- P0792 - Compounder Speed Ratio Error
- P083A - LC Hydraulic Pressure Test
- Notes
- Test Step 1 - Checking For Loss Of Prime DTC
- Test Step 2 - Check For Related Transmission DTCS
- Test Step 3 - Check To See If DTC P083A Is Current
- Test Step 4 - PCM And Wiring
- Test Step 5 - (T81) LC Pressure Signal Circuit Open
- Test Step 6 - (T81) LC Pressure Signal Circuit Short To Ground
- Test Step 7 - (T81) LC Pressure Signal Circuit Short To Voltage
- Test Step 8 - (T16) Transmission Control Output Circuit Open
- Test Step 9 - Check The Wiring And Connectors
- P083B - LC Pressure Switch Rationality
- Notes
- Test Step 1 - Check If Related TCM DTCS Are Present
- Test Step 2 - Check For Loss Of Prime DTC
- Test Step 3 - Check To See If P083B Is Current
- Test Step 4 - PCM And Wiring
- Test Step 5 - (T81) LC Pressure Signal Circuit Open
- Test Step 6 - (T81) LC Pressure Signal Circuit Short To Ground
- Test Step 7 - (T81) LC Pressure Switch Sense Circuit Short To Voltage
- Test Step 8 - Check The Wiring And Connectors
- P0841 - L/R Pressure Switch Rationality
- Notes
- Test Step 1 - Check If Related TCM DTCS Are Present
- Test Step 2 - Check For Loss Of Prime DTC
- Test Step 3 - Check To See If P0841 Is Current
- Test Step 4 - PCM And Wiring
- Test Step 5 - (T50) L/R Pressure Signal Circuit Open
- Test Step 6 - (T50) L/R Pressure Signal Circuit Shorted To Ground
- Test Step 7 - (T50) L/R Pressure Signal Circuit Shorted To Voltage
- Test Step 8 - Check The Wiring And Connectors
- P0845 - 2/4 Hydraulic Pressure Test
- Notes
- Test Step 1 - Checking For Loss Of Prime DTC
- Test Step 2 - Check For Related Transmission DTCS
- Test Step 3 - Check For Contaminated Fluid
- Test Step 4 - Check If DTC P0845 Is Current
- Test Step 5 - PCM And Wiring
- Test Step 6 - (T47) 2/4 Pressure Signal Circuit Open
- Test Step 7 - (T47) 2/4 Pressure Signal Circuit Shorted To Ground
- Test Step 8 - (T47) 2/4 Pressure Signal Circuit Shorted To Voltage
- Test Step 9 - Transmission Control Output Circuit Open
- Test Step 10 - Check The Wiring And Connectors
- P0846 - 2/4 Pressure Switch Rationality
- Notes
- Test Step 1 - Check If Related TCM DTCS Are Present
- Test Step 2 - Check For Loss Of Prime DTC
- Test Step 3 - Check If P0846 Is Current
- Test Step 4 - PCM And Wiring
- Test Step 5 - (T47) 2/4 Pressure Signal Circuit Open
- Test Step 6 - (T47) 2/4 Pressure Signal Circuit Shorted To Ground
- Test Step 7 - (T47) 2/4 Pressure Signal Circuit Shorted To Voltage
- Test Step 8 - Check The Wiring And Connectors
- P084A - DC Hydraulic Pressure Test
- Notes
- Test Step 1 - Checking For Loss Of Prime DTC
- Test Step 2 - Check For Related Transmission DTCS
- Test Step 3 - Check If DTC P084A Is Current
- Test Step 4 - PCM And Wiring
- Test Step 5 - (T83) DC Pressure Signal Circuit Open
- Test Step 6 - (T83) DC Pressure Signal Circuit Short To Ground
- Test Step 7 - (T83) DC Pressure Signal Circuit Short To Voltage
- Test Step 8 - Transmission Control Output Circuit Open
- Test Step 9 - Check The Wiring And Connectors
- P084B - DC Pressure Switch Rationality
- Notes
- Test Step 1 - Check If Related TCM DTCS Are Present
- Test Step 2 - Check For Loss Of Prime DTC
- Test Step 3 - Check If DTC P084B Is Current
- Test Step 4 - PCM And Wiring
- Test Step 5 - (T83) DC Pressure Signal Circuit Open
- Test Step 6 - (T83) DC Pressure Signal Circuit Short To Ground
- Test Step 7 - (T83) DC Pressure Signal Circuit Short To Voltage
- Test Step 8 - Check The Wiring And Connectors
- Automatic Transmission 62TE
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.