Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Step-By-Step Instructions
Check PCM Odometer
From the "Home" screen, select "ECU View".
- Select "PCM".
- Select "Misc. Functions".
- Select "Check PCM odometer" and follow the on screen instructions.
- When complete, select "Finish".
Check PCM VIN
From the "Home" screen, select "ECU View".
- Select "PCM"
- Select "Misc. Functions"
- Select "Check PCM VIN" and follow the on screen instructions.
- When complete, select "Finish".
Learn ETC
From the "Home" screen, select "ECU View".
- Select "PCM".
- Select "Misc. Functions".
- Select "Learn ETC" and follow the on screen instructions.
- When complete, select "Finish".
PCM Replaced
The vehicle pin (Personal Identification Number) will be required to complete the routine. This information may be obtained in three ways:
- The original selling invoice.
- DealerCONNECT > Parts > Key Codes.
- Contacting the District Manager.
From the "Home" screen, select "ECU View".
- Select "WCM".
- Select "Misc. Functions".
- Select "PCM Replaced" and follow the on screen instructions.
- When complete, select "Finish".
Quicklearn
From the "Home" screen, select "ECU View".
- Select "PCM".
- Select "Misc. Functions".
- Select "Quicklearn" and follow the on screen instructions.
- When complete, select "Finish".
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.