Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2010ROUTAN SREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSNON-DTC BASED DIAGNOSTICS (ELECTRICAL EQUIPMENT - AUTOMATIC TRANSMISSION)00 GENERAL, TECHNICAL DATAENGINE MECHANICAL, FUEL INJECTION AND IGNITIONNO RESPONSE/NO START CONDITIONNOTES
2010 Volkswagen Routan S
No Response/No Start Condition: Notes
2010 Volkswagen Routan SSECTION Notes
For a complete wiring diagram, refer to appropriate Wiring Diagram.
| Possible Causes |
|---|
| INTERMITTENT NO RESPONSE CONDITION |
| ASD RELAY CONTROL CIRCUIT K51 SHORTED TO VOLTAGE |
| ASD RELAY CONTROL CIRCUIT K51 SHORTED TO GROUND |
| ASD RELAY CONTROL CIRCUIT K51 OPEN OR HIGH RESISTANCE |
| FUSED B+ CIRCUITS OPEN OR HIGH RESISTANCE |
| FUSED IGNITION SWITCH OUTPUT CIRCUITS OPEN OR HIGH RESISTANCE |
| PCM GROUND CIRCUITS OPEN OR HIGH RESISTANCE |
| CAN C BUS (+) CIRCUIT D65 OPEN |
| CAN C BUS (-) CIRCUIT D64 OPEN |
| POWERTRAIN CONTROL MODULE |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.