Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Front Engine Mount Bracket: Installing
-- Position the engine mount bracket (2) to the engine block.
-- Install the engine mount bracket bolts (1) until snug. Do not tighten at this time.
-- Install the engine mount bracket bolts (1) to the engine mount bracket (2).
-- Tighten the engine mount bracket bolts (1) to 100 Nm (74 ft lbs).
-- Position the hose bracket to the engine mount and install the bolt (3).
-- Tighten the engine mount bracket bolts (1) to 100 Nm (74 ft lbs).
-- Install the engine mount through bolt (4). Tighten the bolt to 54 Nm (40 ft lbs).
-- Remove the adjustable jack from under the engine, if necessary.
-- Lower the vehicle.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.