Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2010ROUTAN SREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 166 (AUTOMATIC TRANSMISSION - CVT)SPECIFICATIONSGENERAL SPECIFICATIONS
2010 Volkswagen Routan S
General Specifications
2010 Volkswagen Routan SSECTION General Specifications
WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Fluid | |
|
CAUTION:
MERCON®, MERCON® V and MERCON®SP are not interchangeable with the Motorcraft Continuously Variable Chain Type Transmission Fluid. The use of any other fluid or cleaning agents will cause internal transaxle damage. Refer to the Owner/Schedule Maintenance Guide to determine the correct service interval for the specific vehicle.
|
|
|
CAUTION:
The transmission fluid used for continuously variable transaxle (CVT) and 6-speed transaxles are unique. Do not use water-based cleaners to clean or flush the cooler tubes or transmission damage will occur. Mineral spirits can be used to clean the cooler tubes, providing the cooler tubes are flushed with clean automatic transmission fluid and blown dry with shop air. Use only clean automatic transmission fluid designated for the transmission and torque converter being serviced.
|
|
|
CAUTION:
The use of cleaning solvents and petroleum lubricants should not be used on this transaxle. They may contaminate the CVT fluid and cause internal transaxle damage. Only clean CVT fluid should be used to clean and assemble this transaxle.
|
|
| Motorcraft Continuously Variable Chain Type Transmission Fluid XT-7-QCFT | WSS-M2C933-A |
| Fluid Capacities | |
| All | 9.6L (10 quarts) (approximate dry fill capacities) |
| Lubricants | |
| Multi-Purpose Grease XG-4 and/or XL-5 | ESB-M1C93-B |
| Constant Velocity Joint Grease XG-5 | WSS-M1C258-A1 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.