Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Electronic Stability Program Switch
The Electronic Stability Control (ESC) may also be referred to as Electronic Stability Program (ESP) depending on the vehicle model year and configuration. Certain components may also reference ESP, ESC, or use the traction control symbol.
The ESP OFF switch is an integral part of the instrument panel switch pod (1) located in center of the instrument panel. The ESP OFF switch turns the ESP off whenever the switch is depressed. Depressing the switch a second time turns the ESP back on. The switch resets itself each time the ignition is cycled.
When the ESP OFF switch is depressed and released, it does not completely turn the system off. The ESP system reduces torque management to a lesser amount, but ESP function can still occur if the system perceives the need.
The ESP function lamp is illuminated in the cluster whenever the ESP system is turned off.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.