Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Integrated Key Fob Battery Replacement
Do not handle the batteries any more than necessary. Hands must be clean and dry.
-- With the transmitter buttons facing down, use a coin to pry the two halves of the transmitter apart. Make sure not to damage the rubber gasket during separation of the housing halves.
-- Remove the battery from the transmitter back housing holder.
-- Replace the batteries. Avoid touching the new batteries with your fingers, Skin oils may cause battery deterioration. If you touch a battery, clean it off with rubbing alcohol.
-- To assemble the transmitter case, snap the two halves together.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.