Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2010ROUTAN SREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMSCOMMUNICATION DTC BASED DIAGNOSTICS (2 OF 2)00 GENERAL, TECHNICAL DATAVIDEO ENTERTAINMENT SYSTEM (VES2)U0010-CAN INTERIOR BUSTEST STEP 1 - VERIFY DIAGNOSTIC TROUBLE CODE (DTC) IS ACTIVE
2010 Volkswagen Routan S
Test Step 1 - VERIFY DIAGNOSTIC TROUBLE CODE (DTC) IS ACTIVE
2010 Volkswagen Routan SSECTION Test Step 1 - VERIFY DIAGNOSTIC TROUBLE CODE (DTC) IS ACTIVE
NOTE:
Make sure the IOD fuse is installed and battery voltage is between 10 and 16 volts before proceeding.
- Using the scan tool, read active DTCs.
Is this DTC active?
Yes
- Refer to U0010 - CAN INTERIOR BUS and perform the U0010-CAN Interior Bus diagnostic procedure.
No
- Refer to Stored Lost Communication DTCS (2009 - 2010) or Stored Lost Communication DTCS (2011 & Up) and perform the Stored Lost Communication DTCs diagnostic procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.