U0208 - Lost Communication With Heated Seats Control Module: Notes

2010 Volkswagen Routan SSECTION Notes
Fig 1: Identifying Lost Communication With Heated Seats Control Module
GWWUS451537Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

For wiring diagram information, refer to appropriate SYSTEM WIRING DIAGRAMS article.

  • >>When Monitored:<< With the ignition ON.
  • >>Set Condition:<< The instrument cluster does not receive information from the heated seats control module.
Possible Causes
TOTALLY INTEGRATED POWER MODULE FUSE M8
FUSED RUN RELAY OUTPUT CIRCUIT P693 SHORT to GROUND
RUN RELAY OUTPUT CIRCUIT OPEN
LIN BUS CIRCUIT D506 OPEN
FUSED RUN RELAY OUTPUT CIRCUIT P693 OPEN
GROUND CIRCUIT Z908/Z909 OPEN
FUSED RUN RELAY OUTPUT CIRCUIT P693 SHORT to GROUND CIRCUIT Z908/Z909
TOTALLY INTEGRATED POWER MODULE
HEATED SEATS MODULE
INSTRUMENT CLUSTER
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.