Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2010ROUTAN SREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESBODY EXTERIOR DTC BASED DIAGNOSTICS - POWER LIFTGATE MODULE00 GENERAL, TECHNICAL DATAPOWER LIFTGATE MODULEB196A - POWER LIFTGATE CLOSE DIRECTION OVERCURRENTTEST STEP 7 - POWER LIFTGATE DRIVE UNIT
2010 Volkswagen Routan S
Test Step 7 - Power Liftgate Drive Unit
2010 Volkswagen Routan SSECTION Test Step 7 - Power Liftgate Drive Unit
- Reconnect all connectors.
- Operate the power liftgate in both directions if possible.
Does the motor start to lift or lower the liftgate but moves very slow and labors extensively?
Yes
- Replace the power liftgate drive unit assembly. Refer to POWER LIFTGATE DRIVE UNIT .
- Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .
No
- Replace the power liftgate module. Refer to POWER LIFTGATE CONTROL MODULE .
- Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.