Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2009NEW BEETLE (1C1) L5-2.5L (BPS)REPAIR AND DIAGNOSISLIGHTING AND HORNSTURN SIGNALSTURN SIGNAL LAMPSERVICE AND REPAIRFRONT TURN SIGNAL, FROM 07.2005
2009 Volkswagen New Beetle (1C1) L5-2.5L (BPS)
Front Turn Signal, From 07.2005
2009 Volkswagen New Beetle (1C1) L5-2.5L (BPS)SECTION Front Turn Signal, From 07.2005
Front Turn Signal, From 07.2005
• Removing and installing a right turn signal is shown in the illustrations.
CAUTION!
• Turn off the ignition and all electrical components.
• Remove the ignition key.
Removing
Vehicles with charge air cooler
- Install the spring - arrow - with a long screwdriver.
- Remove the turn signal forward.
Continued for all vehicles
- Install the spring - arrow -.
- Remove the turn signal forward.
- Disconnect the connector - arrow - from the turn signal.
Installing
Install in reverse order of removal, noting the following:
- Install the turn signal and guide - arrow - into the frame inside the bumper.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.