SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2009GTI 2D HATCHBACK, 2.0 D, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)HEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSHEATING, VENTILATION (A5 PLATFORM)HEATING, VENTILATIONSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2009 Volkswagen GTI 2D Hatchback, 2.0 D, Standard

Fastener Tightening Specifications

2009 Volkswagen GTI 2D Hatchback, 2.0 D, StandardSECTION Fastener Tightening Specifications
Component Fastener Size Nm
Air Distribution Housing to Heating and A/C Unit, Bolts   1.4
Fresh Air Blower   1
Footwell Vent, Screws   1.5 ± 0.2
Heat and Fresh Air Controls, Screws   1.5 ± 0.2
Heater Unit to Heater Cable Bracket, Screws   4.5 ± 0.7
Heater Unit to Bracket, Screws1   8 ± 1
Heater Unit to Bracket, Screws4   9 ±1.3
Intake Air Grille to Plenum Chamber, Nuts   2.5 ± 0.4
Subframe to Right and Left Support2   9 ± 1.3
Subframe to Right and Left Support3   20 ± 3
  • 1 For bolt tightening clarification, refer to HEATER UNIT  and see items -6-
  • 2 For bolt tightening clarification, refer to HEATER UNIT  and see items -8-
  • 3 For bolt tightening clarification, refer to HEATER UNIT  and see items -10-
  • 4 For bolt tightening clarification, refer to HEATER UNIT  and see items -12, 14-
    
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.