Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSVOLKSWAGEN2009GTI 2D HATCHBACK, 2.0 D, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)HEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSHEATING, VENTILATION (A5 PLATFORM)HEATING, VENTILATIONREMOVAL AND INSTALLATIONHEATING UNIT PARTITION

2009 Volkswagen GTI 2D Hatchback, 2.0 D, Standard

Heating Unit Partition

2009 Volkswagen GTI 2D Hatchback, 2.0 D, StandardSECTION Heating Unit Partition

Removing

-- Remove the plastic screws -2- and the partition -1-.

Fig 1: Heating And Ventilation Unit Partition Remove/Install Components

GWWN80-10014

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- First insert seal into bulkhead between heater and engine compartment -A-, then place on heater core.

Fig 2: Heating And Ventilation Unit Seal At Bulkhead, Installation Position

GWWN80-10012

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.