2008 Volkswagen R32FACTORY OEM SERVICE PROCEDURE

Interrogating The Fault Memory

Procedure 

-- Connect the scan tool.

-- Switch the ignition to the "ON" position.

-- Select "Mode 03 - Interrogating Fault Memory ".

-- The stored DTC or DTC's will be displayed on the scan tool screen.

The following table is an example of the DTC information that may be displayed on the scan tool screen:

Indication example Explanation
P0444 SAE Diagnostic Trouble Code (DTC)
Evaporative Emission (EVAP) Canister Purge Regulator Valve Malfunctioning wiring path or malfunctioning component
Circuit Open Malfunction type as next

-- Refer to the following DTC tables for the diagnostic repair procedure:

-- Switch the ignition off.

End of Procedure

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.