Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Volkswagen R32FACTORY OEM SERVICE PROCEDURE
3.2L - Generic Scan Tool - Engine Code(S): CBRA
- St Generic Scan Tool
- OBD, General Information
- Diagnostic Mode, Selecting
- Notes
- Diagnostic Modes Description
- Diagnostic Mode 01 - Read Current System Data
- Diagnostic Mode 02 - Read Operating Conditions
- Diagnostic Mode 03 - Read DTC Memory
- Interrogating The Fault Memory
- Diagnostic Mode 04 - Erase DTC Memory
- Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions
- Notes
- Test-ID 01 ($01): Oxygen Sensor Monitor Bank 1 - Sensor 1
- Test-ID 02 ($02): Oxygen Sensor Monitor Bank 1- Sensor 2
- Test-ID 05 ($05): Oxygen Sensor Monitor Bank 2 - Sensor 1
- Test-ID 06 ($06): Oxygen Sensor Monitor Bank 2 - Sensor 2
- Test-ID 33 ($21): Catalyst Monitor Bank 1
- Test-ID 34 ($22): Catalyst Monitor Bank 2
- $3A (58): Fuel Tank EVAP System Leak Test (0.090")
- Test-ID 59 (3B): EVAP Monitor (0.040)
- Test-ID 60 (3C): EVAP Monitor (0.020)
- Test-ID 61 (3D): Purge Flow Monitor
- Test-ID 65 ($41): Oxygen Sensor Heater Monitor Bank 1 - Sensor 1
- Test-ID 66 ($42): Oxygen Sensor Heater Monitor Bank 1 - Sensor 2
- Test-ID 69 ($45): Oxygen Sensor Heater Monitor Bank 2 - Sensor 1
- Test-ID 70 ($46): Oxygen Sensor Heater Monitor Bank 2 - Sensor 2
- OBDMID $71 (113): Secondary Air Injection (AIR) System (Bank 1)
- OBDMID $72 (114): Secondary Air Injection (AIR) System (Bank 2)
- Test-ID 162 ($A2): Misfire Cylinder 1 Data
- Test-ID 163 ($A3): Misfire Cylinder 2 Data
- Test-ID 164 ($A4): Misfire Cylinder 3 Data
- Test-ID 165 ($A5): Misfire Cylinder 4 Data
- Test-ID 166 ($A6): Misfire Cylinder 5 Data
- Test-ID 167 ($A7): Misfire Cylinder 6 Data
- Diagnostic Mode 07 - Read Faults Detected During The Current Or Last Driving Cycle
- Diagnostic Mode 08 - Request Control Of On-Board System, Test Or Component
- Diagnostic Mode 09 - Read Vehicle Information
- General Diagnosis
- Readiness Code
- Diagnostic Trouble Code Tables
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.