Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2008JETTA SE, 2.5 M, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMESEATSBODY ON BOARD DIAGNOSTIC (OBD) (A4 PLATFORM) [CONVENIENCE SYSTEM (VEHICLES WITH POWER WINDOWS), ON BOARD DIAGNOSTIC (OBD)]01 ON BOARD DIAGNOSTIC (OBD)CONVENIENCE SYSTEM (VEHICLES WITH POWER WINDOWS), ON BOARD DIAGNOSTIC (OBD)DISPLAY GROUP OVERVIEW, VEHICLES FROM 06.01 ONBREAK DOWN OF DISPLAY CONTENT FOR DISPLAY GROUP NUMBER 009
2008 Volkswagen Jetta SE, 2.5 M, Automatic
Break down of display content for display group number 009
2008 Volkswagen Jetta SE, 2.5 M, AutomaticSECTION Break down of display content for display group number 009
| Display group 009 -Central control module- | ||||||
| Read measured value block 9 | → | ← Indicated on display | ||||
| xxx | xxx | xxx | xxx | |||
| 1 | 2 | 3 | 4 | ← Display zones | Specification | Evaluation |
| Central locking feedback, rear right | safe, not safe locked, unlocked |
Refer to Evaluating display group number 009 | ||||
| Central locking feedback, rear left | safe, not safe locked, unlocked |
|||||
| Central locking feedback, front passenger's side | Safe not Safe locked, unlocked |
|||||
| Central locking feedback, driver's side | Safe not Safe locked, unlocked |
|||||
1) Rear left and rear right for 2 door and Midi (4 door with electric front windows): not installed
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.