SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2008JETTA SE, 2.5 M, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTANTI-THEFT SYSTEMSBODY ON BOARD DIAGNOSTIC (OBD) (A4 PLATFORM) [CONVENIENCE SYSTEM (VEHICLES WITH POWER WINDOWS), ON BOARD DIAGNOSTIC (OBD)]01 ON BOARD DIAGNOSTIC (OBD)CONVENIENCE SYSTEM (VEHICLES WITH POWER WINDOWS), ON BOARD DIAGNOSTIC (OBD)DISPLAY GROUP OVERVIEW, VEHICLES THROUGH 05.01EVALUATING DISPLAY GROUP NUMBER 004
2008 Volkswagen Jetta SE, 2.5 M, Automatic

Evaluating display group number 004

2008 Volkswagen Jetta SE, 2.5 M, AutomaticSECTION Evaluating display group number 004
Display zone  Description  Display  Corrective action 
1 Driver's mirror adjustment switch FS Pos X+
Pos X-
Pos Y+
Pos Y-
not operated
  • Visual check of wiring
  • Check that connections of relevant current circuit are correctly connected and seated securely while simultaneously observing display
  • If the display does not change when operating, repair malfunction or replace relevant component
  • Erase DTC memory
  • Perform functional check
  • Check DTC memory again
2 Driver's mirror selection switch left
right
move mirror,
not operated		  
3 Driver's mirror release switch mid. pos.
end pos.
not installed		  
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.