SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2008EOS TURBO, STANDARDREPAIR AND DIAGNOSISTRANSMISSIONMANUAL TRANSFINAL DRIVE, DIFFERENTIAL - MANUAL TRANSMISSION 02Q39 FINAL DRIVE, DIFFERENTIALSPECIAL TOOLS
2008 Volkswagen Eos Turbo, Standard

Special Tools

2008 Volkswagen Eos Turbo, StandardSECTION Special Tools

Special tools and workshop equipment required 

  • Thrust Disc VW 412
  • Thrust Piece 40-105
  • Thrust Pad 3005
  • Tube 60 mm Dia.VW 415 A
    Fig 1: Identifying Tube VW 415 A
    GWWW00-0038Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 2: Identifying Special Tools - Differential, Adjusting
GWWW39-0221Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

  • Transmission Support VW 353
  • Magnetic Plate 50 mm Dia.VW 385/17
  • Dial Gauge Holder VW 387
  • Thrust Plate VW 402
  • Punch VW 408 A
  • Thrust Pad 3005
Fig 3: Identifying Special Tools - Oil Seal For Left Flanged Shaft, Replacing
GWWW39-0226Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

  • Slide Hammer-Complete Set VW 771
  • Additional Part for VW 771 VW 771/37
  • Thrust Piece 3305
  • Torque Wrench (5-50 Nm) V.A.G 1331
  • Torque Wrench (40-200 Nm) V.A.G 1332
Fig 4: Identifying Special Tools -- Differential, Disassembling And Assembling (2 Of 2)
GWWW39-10002Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

  • Tube 3259
  • Tube 3296
  • Press Tool 3345
  • Tapered Roller Bearing Puller V.A.G 1582
  • Attachment to V.A.G 1582 V.A.G 1582/6A
  • -1- Kukko Extractor 46-58 mm 21/7
  • -2- Kukko Puller 65-160 mm 18/1
  • -3- Kukko Separating Tool 12-75 mm 17/1
  • -4- Kukko Support 22/2
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.