SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2008EOS TURBO, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 18 (3.2L - ENGINE ASSEMBLY - ENGINE CODE(S): BUB & CBRA)10 ENGINE ASSEMBLYSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2008 Volkswagen Eos Turbo, Standard

Fastener Tightening Specifications

2008 Volkswagen Eos Turbo, StandardSECTION Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
Component Fastener Size Nm
Bolts and Nuts
  M6 10
M7 15
M8 25
M10 40
M12 60
Fig 1: Identifying Engine Mount & Bolts
GWWN10-0448Courtesy of VOLKSWAGEN UNITED STATES, INC.

A = 20 Nm + an additional 90° (1/4) turn 1

B = 40 Nm + an additional 90° (1/4) turn 1

C = 60 Nm + an additional 90° (1/4) turn 1

Fig 2: Identifying Transmission Assembly Mount & Bolts
GWWN10-0446Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 = 40 Nm + an additional 90° (1/4) turn 1

2 = 60 Nm + an additional 90° (1/4) turn 1

Fig 3: Identifying Pendulum Supports & Bolts
GWWN10-0449Courtesy of VOLKSWAGEN UNITED STATES, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.