Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSVOLKSWAGEN2008EOS TURBO, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 94 (2.5L - ENGINE ASSEMBLY - ENGINE CODE(S): CBTA & CBUA)10 ENGINE ASSEMBLYSPECIAL TOOLS

2008 Volkswagen Eos Turbo, Standard

Special Tools

2008 Volkswagen Eos Turbo, StandardSECTION Special Tools

WARNING: This page is about a different car, the 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Shop Crane - Load Cap = 700-1200 KGVAS 6100
Torque Wrench (40-200 Nm) V.A.G 1332
Crankshaft Adapter T03003
Socket SW15V/175
Hose Clamps up to 25 mm Dia. 3094
Hose Clamps, up to 40 mm 3093
Torque Wrench (5-50 Nm) V.A.G 1331

Fig 1: Identifying Torque Wrench (5 To 50 Nm) V.A.G 1331
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Guide Pins T10093

Fig 2: Identifying Guide Pins T10093
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Adapters for Service Position T10467

Fig 3: Adapter T10467
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Socket T40055

Fig 4: Identifying Socket T40055
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 5: Identifying Engine Support Bridge Components

GWWW10-10080

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Mount T40093/5 from the Engine Support Supplement Set T40093
Moveable Joint T40093/4 (Qty: 2) from the Engine Support Supplement Set T40093
Moveable Joint T40091/3 (Qty: 2) from the Engine Support Basic Set T40091
Rail with Holes T40091/2 from the Engine Support Basic Set T40091
Square Pipe T40091/1 (Qty: 2) from the Engine Support Basic Set T40091
Engine Support Bridge 10-222 A
Adapter 10-222 A/28
Adapter 10-222 A/28-2 (Qty: 2)
Shackle 10/222 A/12
Bracket with Spindle and Hook 10-222 A/10
Adapter 10-222 A/7
Support Bracket 10-222 A/31

Fig 6: Identifying Special Service Tools

GWWW10-10064

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Hose Clip Pliers VAS 6340
Hose Clip Pliers VAS 6362
Engine-/Gearbox Jack V.A.G 1383 A
Tensioning Strap T10038
Step Ladder VAS 5085
Engine Holder Bracket T03000

Fig 7: Identifying Special Tools -- Engine, Securing To Assembly Stand

GWWW10-10028

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Lifting Tackle 3033
Shop Crane - Load Cap = 700-1200 KGVAS 6100
Engine and Transmission Holder VAS 6095
Engine Lateral Bracket T03001
Transport Arm T03002

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.