Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fresh Air Blower Control Module -J126-: Removing
-- The Fresh Air Blower -V2- and Fresh Air Blower Control Module -J126-, removing, refer to Fresh Air Blower -V2- .
-- Disconnect the connector -3- from the Fresh Air Blower Control Module -J126- -4-.
-- Remove the bolts -2- (2 Nm).
-- Remove the Fresh Air Blower Control Module -J126- -4- from the Fresh Air Blower -V2- -1-.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.