Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSVOLKSWAGEN2008EOS TURBO, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1 (FLUID CAPACITY TABLES)FLUID CAPACITY TABLESMODEL YEAR: 2010

2008 Volkswagen Eos Turbo, Standard

Model Year: 2010

2008 Volkswagen Eos Turbo, StandardSECTION Model Year: 2010

WARNING: This page is about a different car, the 2010 Volkswagen Eos. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

All quantities are approximate. Always refer to the Repair Information and/or the Maintenance Procedures for correct filling instructions.

Part numbers are for reference only. Always check with your parts department for the latest information.

Component/System		Capacity	Part Number/Specification
2.0T Engine
	Oil and Filter Change	4.6 L (4.9 qt.)	-VW 502 00-
	Coolant	7.2 L (8.5 qt.)	-G 012 A8G or G 012 A8F-
6 Speed Manual Transmission 02Q
	Initial Fill	2.3 L (2.4 qt.)	-G 502 171 A2-
6 Speed Direct Shift Gearbox 02E
	Initial Fill	6.9 - 7.2 L (7.3 - 7.6 qt.)	-G 052 182 A2-
	Refill	5.2 L (5.5 qt.)	-G 052 182 A2-
Brake System
	-	1.0 L (1.1 qt.)	-B 000 750-
A/C System
	Refrigerant	525 25 g (18.5 0.9 oz.)	See ETKA
	PAG Oil, Sanden	110 10 cc (3.7 0.3 fl. oz.)	-G 052 154 A2-
	PAG Oil, Zexel	120 15 cc (4.0 0.5 fl. oz.)	-G 052 200 A2-
	PAG Oil, Denso	140 10 cc (4.7 0.3 fl. oz.)	-G 052 300 A2-
Window/Headlamp Washer System
	-	3.0 L (3.2 qt.)	-G 052 164-

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.