Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Brake Fluid Level, Checking
If brake fluid level is below MIN mark -2-, check brake system "repair procedure", before adding brake fluid.
Specification of brake fluid, refer to BRAKE AND CLUTCH SYSTEM, CHANGING BRAKE FLUID .
Brake Fluid Level, Checking Depending on Brake Pad Wear
Brake Fluid Level at Delivery Inspection
-- At time of delivery inspection, brake fluid level must be at MAX mark -1-.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.