Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Oil
Oil System Capacity:
For the correct engine oil and capacity, refer to Fluid Capacity Tables .
Changing the oil, refer to Maintenance Procedures .
Marks on the Oil Dipstick:
1 - MAX mark
2 - MIN. mark
a - Oil level in the area of the MAX mark: Do not add engine oil.
b - Oil level in the center area: Engine oil can be added.
c - Oil level in the area of the MIN. mark: Add approximately 0.5 liter of engine oil!
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.