Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Cd Changer Transport Protection Device, Activating/Deactivating
Transport protection device must be activated before shipping of RCD 510 or deactivated when installing a new unit. This takes place electronically over the unit's buttons. After activating the transportation safeguard, the CD changer mechanism is brought into >>transportation position<<.
Activating Transportation Safeguard
Unit condition: >>ON<<, the wiring connections must be connected to the RCD 510.
-- Press and hold buttons marked with -arrows- simultaneously for 5 seconds.
"CDC transportation safeguard activated" appears in the radio display.
Now the transportation safeguard is activated.
Deactivating Transportation Safeguard
Unit condition: >>ON<<, the wiring connections must be connected to the RCD 510.
-- Press and hold buttons marked with -arrows- simultaneously for 5 seconds.
CDC transportation safeguard activated appears in the radio display.
The "deactivating" button also appears.
-- Press the "deactivating" button.
Now the transportation safeguard is deactivated.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.