Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSVOLKSWAGEN2007RABBIT 2D HATCHBACK, 2.5 S, AUTOMATICREPAIR AND DIAGNOSISELECTRICALHORNSCOMMUNICATION91 COMMUNICATIONDESCRIPTION AND OPERATIONRADIO NAVIGATION SYSTEM 2 WITH MULTIFUNCTION DISPLAY CONNECTOR OVERVIEWNOTES

2007 Volkswagen Rabbit 2D Hatchback, 2.5 S, Automatic

Radio Navigation System 2 With MULTIFUNCTION Display Connector Overview: Notes

2007 Volkswagen Rabbit 2D Hatchback, 2.5 S, AutomaticSECTION Notes

Fig 1: Identifying Multi-Pin Electrical Connection Assignments

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1 -
Multiple Connector 1, 18-Pin
- Multi-pin connector assignments, refer to 18-PIN CONNECTOR 1, VIDEO AND LF INPUT .
2 -
Connector 2
- Connection for navigation system antenna
- Multi-pin connector assignments, refer to CONNECTOR 2 .
3 -
Multiple Connector 3, 8-Pin
- Multi-pin connector assignments, refer to 8-PIN CONNECTOR 3, SPEAKER OUTPUTS .
4 -
Multiple Connector 4, 8-Pin
- Multi-pin connector assignments, refer to 8-PIN CONNECTOR 4, VOLTAGE SUPPLY WIRES AND CAN-BUS .
5 -
Multiple Connector 5, 12-Pin
- Multi-pin connector assignments, refer to 12-PIN CONNECTOR 5, TELEPHONE SIGNALS AND PRE-AMPLIFIER OUTPUT SIGNALS .
6 -
Multiple Connector 6, 12-Pin
- Multi-pin connector assignments, refer to 12-PIN CONNECTOR 6, CD CHANGER CONTROL AND AUDIO INPUT SIGNALS .
7 -
Connector 7
- Antenna connection
- Multi-pin connector assignments, refer to ANTENNA CONNECTORS 7 AND 8 .
8 -
Connector 8
- Antenna connection
- Multi-pin connector assignments, refer to ANTENNA CONNECTORS 7 AND 8 .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.