Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSVOLKSWAGEN2007GTI FAHRENHEITREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICES91 COMMUNICATIONDESCRIPTION AND OPERATIONRNS 300 CONNECTOR OVERVIEWNOTES

2007 Volkswagen GTI Fahrenheit

RNS 300 Connector Overview: Notes

2007 Volkswagen GTI FahrenheitSECTION Notes

Fig 1: RNS 300 Connector Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1 -
Multiple Connector 1, 8-Pin
- Multi-pin connector assignments, refer to 8-PIN CONNECTOR 1, SPEAKER OUTPUTS .
2 -
Multiple Connector 2, 8-Pin
- Multi-pin connector assignments, refer to 8-PIN CONNECTOR 2, VOLTAGE SUPPLY WIRES AND CAN-BUS .
3 -
Multiple Connector 3, 12-Pin
- Multi-pin connector assignments, refer to 12-PIN CONNECTOR 3, TELEPHONE SIGNALS .
4 -
Multiple Connector 4, 12-Pin
- Multi-pin connector assignments, refer to 12-PIN CONNECTOR 4, CD CHANGER CONTROL AND AUDIO INPUT SIGNALS .
5 -
Connector 5
- Navigation antenna connection
- Multi-pin connector assignments, refer to ANTENNA CONNECTORS 5 AND 6 .
6 -
Connector 6
- Radio reception antenna connection
- Multi-pin connector assignments, refer to ANTENNA CONNECTORS 5 AND 6 .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.