Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2002JETTA GLX SEDAN (9M2) V6-2.8L (AFP)REPAIR AND DIAGNOSISLIGHTING AND HORNSTURN SIGNALSTURN SIGNAL LAMPTURN SIGNAL BULBSERVICE AND REPAIR
2002 Volkswagen Jetta GLX Sedan (9M2) V6-2.8L (AFP)
Turn Signal Bulb: Service and Repair
2002 Volkswagen Jetta GLX Sedan (9M2) V6-2.8L (AFP)SECTION Service and Repair
Parking/turn Signal Bulb, Replacing
- Switch off all electrical consumers, switch off ignition key and remove ignition key.
- Release spring clip -arrow- and remove sealing cover.
- Turn bulb holder -arrow- to left and pull out of housing.
- Remove bulb from the holder.
Install in reverse order of removal.
NOTE: When installing, ensure bulb holder engages in bulb housing.
- Install sealing cover.
- Check turn signal (bulb) function.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.