SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2002GOLF GLS, 2.0 K, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 99 (2.0L - GENERIC SCAN TOOL, ENGINE CODE(S): AEG (A4 PLATFORM))28 - IGNITION/GLOW PLUG SYSTEMIGNITION, SERVICINGGENERAL NOTES ON IGNITION SYSTEM
2002 Volkswagen Golf GLS, 2.0 K, Standard

General notes on ignition system

2002 Volkswagen Golf GLS, 2.0 K, StandardSECTION General notes on ignition system
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2001 Volkswagen Jetta, 2000 Volkswagen Jetta, 2000 Volkswagen Golf, 2000 Volkswagen GTI, and 1999 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

For all Ignition/Glow plug system component locations. Refer to 28 - Ignition/Glow plug System  .

For all Ignition/Glow plug system removal/installation procedures and torque specifications. Refer to 28 - Ignition/Glow plug System  .

Check the Technical Bulletins for information that may supersede any information included in this manual. Refer to EBAHN-Website.

NOTE:
  • All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool or are available for purchase through the manufacturer. Refer to Tool catalog.
  • Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.
  • The manufacturers test box Adapter F/VAG1598 (68 Pin) VAG1598/22 is available for purchase or rental. Refer to the Tool catalog.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.