Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2002GOLF GLS, 2.0 K, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 33 (WINDSHIELD WIPER &WASHER SYSTEM (A3 PLATFORM))REAR WINDOW WIPER, SERVICINGNOTES
2002 Volkswagen Golf GLS, 2.0 K, Standard
Rear window wiper, servicing: Notes
2002 Volkswagen Golf GLS, 2.0 K, StandardSECTION Notes
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following list refers to items in Fig 1.
- Wiper motor bracket
- M6 bolt
- 5 N.m (44 in lb)
- Rubber washer
- M6 bolt
- 5 N.m (44 in lb)
- Rear window wiper motor -V12-
- Rubber wiper insert
- Removing and installing, refer to RUBBER WIPER INSERTS, REMOVING AND INSTALLING
- Wiper blade
- Adjusting, refer to Rear wiper arm rest position, adjusting
- Retaining spring
- Wiper arm
- Cap
- Spray nozzle
- Adjusting, refer to Rear wiper arm rest position, adjusting
- M8 nut
- 15 N.m (11 ft lb)
- Washer
- M16 nut
- 7 N.m (62 in lb)
- Plastic washer
- Rubber washer
- Spacer ring
- Connector tube for spray nozzle
- Routed through wiper motor shaft to spray nozzle
- Adjusting spray nozzle, refer to Rear wiper arm rest position, adjusting
- Washer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.