Coding control module

• Insert key in ignition lock.
• Connect VAG 1551 Scan Tool, select operating mode 1 "Rapid data transfer", switch on ignition and enter address word 25 "Immobilizer".

After displaying the control module identification.

• Press --> button.

Indicated on display:

Fig 1: Identifying VAG 1551 Scan Tool Display (Cabrio Up To May 1999 - Coding Control Module) (Select Function XX)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

• Press buttons -0- and -7-. (Code control module" is selected with 07.)

Indicated on display:

Fig 2: Identifying VAG 1551 Scan Tool Display (Cabrio Up To May 1999 - Coding Control Module) (07 Code Control Module)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

• Confirm entry with -Q- button.

Indicated on display:

Fig 3: Identifying VAG 1551 Scan Tool Display (Cabrio Up To May 1999 - Coding Control Module) (Enter Code Number)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

• Enter code number with keys:

09600 - Gas engine 

Entry correction with -C- button possible.

Indicated on display (if 09600 has been entered):

Fig 4: Identifying VAG 1551 Scan Tool Display (Cabrio Up To May 1999 - Coding Control Module) (Enter Code Number 09600)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

• Confirm entry with -Q- button.

Indicated on display:

Fig 5: Identifying VAG 1551 Scan Tool Display (Cabrio Up To May 1999 - Coding Control Module) (Coding Example)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

• Press --> button.

Indicated on display:

Fig 6: Identifying VAG 1551 Scan Tool Display (Cabrio Up To May 1999 - Coding Control Module) (Select Function XX)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Transfer speed in Immobilizer Control Module is matched after exiting diagnosis.