Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2002GOLF GLS, 2.0 K, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 155 (MECHANICAL COMPONENTS - BRAKE SYSTEM (SEDAN) (A5 PLATFORM))46 MECHANICAL COMPONENTSSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2002 Volkswagen Golf GLS, 2.0 K, Standard
Fastener Tightening Specifications
2002 Volkswagen Golf GLS, 2.0 K, StandardSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Nm | ||
|---|---|---|---|
| ABS Wheel Speed Sensor Mounting Bolt | 8 | ||
| Brake Disk Mounting Bolt | 4 | ||
| Brake Line to Front Brake Caliper | 35 | ||
| Brake Line to Rear Brake Caliper | 14 | ||
| Brake Pedal Mounting Bracket Mounting Nut (1) | 25 | ||
| Brake Pedal to Brake Pedal Bracket Mounting Nut (1) | 25 | ||
| Cover Plate Mounting Bolt | |||
| - Front, Rear AWD | 12 | ||
| - Rear FWD | 9 | ||
| Front Wheel Bearing to Wheel Bearing Housing Mounting Bolt | 190 | ||
| Guide Pin to Front Brake Carrier | 30 | ||
| Parking Brake Lever Mounting Bolt | 20 | ||
| Rear Brake Caliper to Brake Carrier Mounting Bolt | 35 | ||
| Rear Brake Carrier to Wheel Bearing Housing Mounting Bolt (1) | 90 + 90° turn | ||
|
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.