Evaluating display group number 010

2002 Volkswagen Golf GLS, 1.9 P, AutomaticSECTION Evaluating display group number 010
Display zone  Description  Display  Corrective action 
1 S-terminal operated
not operated
  • Visual check of wiring
  • Check that connections of relevant current circuit are correctly connected and seated securely while simultaneously observing display
  • If the display does not change when operating, repair malfunction or replace relevant component
  • Erase DTC memory
  • Perform functional check
  • Check DTC memory again
2 Mirror heating on, off
not installed
 
3 Trunk lid/tailgate Key switch2) open
closed
not oper.
implausible
 
4 Ignition Terminal 15 on
Terminal 15 off
 

2) Unclip contact switch on lock cylinder housing (with small lever)

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.