SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2002GOLF GL, 4D HATCHBACK, 1.9 P, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTINFOTAINMENTBODY ON BOARD DIAGNOSTIC (OBD) (A4 PLATFORM) [CONVENIENCE SYSTEM (VEHICLES WITH POWER WINDOWS), ON BOARD DIAGNOSTIC (OBD)]01 ON BOARD DIAGNOSTIC (OBD)CONVENIENCE SYSTEM (VEHICLES WITH POWER WINDOWS), ON BOARD DIAGNOSTIC (OBD)DISPLAY GROUP OVERVIEW, VEHICLES THROUGH 05.01EVALUATING DISPLAY GROUP NUMBER 006
2002 Volkswagen Golf GL, 4D Hatchback, 1.9 P, Automatic

Evaluating display group number 006

2002 Volkswagen Golf GL, 4D Hatchback, 1.9 P, AutomaticSECTION Evaluating display group number 006
Display zone  Description  Display  Corrective action 
1 Key switch, front passenger's side open
closed
not operated
implausible
  • Visual check of wiring
  • Check that connections of relevant current circuit are correctly connected and seated securely while simultaneously observing display
  • If the display does not change when operating, repair malfunction or replace relevant component
  • Erase DTC memory
  • Perform functional check
  • Check DTC memory again
2 Rotary latch switch1)
Electric window thermo protection2) front passenger's side		 dr. open: 1
dr. closed: 0
active: 0
inactive: 1		  
3 Central locking feedback, front passenger's side locked
unlocked		  
4 Central locking feedback, front passenger's side safe
not safe		  

1) There is a contact switch in door lock

2) Software thermo protection (overload protection for electric window motor). The electric window will be switched off for approx. 10 to 20 seconds

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.