Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2002GOLF GL, 2D HATCHBACK, 2.0 K, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTINFOTAINMENTBODY ON BOARD DIAGNOSTIC (OBD) (A4 PLATFORM) [CONVENIENCE SYSTEM (VEHICLES WITH POWER WINDOWS), ON BOARD DIAGNOSTIC (OBD)]01 ON BOARD DIAGNOSTIC (OBD)CONVENIENCE SYSTEM (VEHICLES WITH POWER WINDOWS), ON BOARD DIAGNOSTIC (OBD)DISPLAY GROUP OVERVIEW, VEHICLES FROM 06.01 ONEVALUATING DISPLAY GROUP NUMBER 002
2002 Volkswagen Golf GL, 2D Hatchback, 2.0 K, Standard
Evaluating display group number 002
2002 Volkswagen Golf GL, 2D Hatchback, 2.0 K, StandardSECTION Evaluating display group number 002
| Display zone | Description | Display | Corrective action | ||
| 1 | Driver's switch for front passenger's side electric window 1) | autom. open, autom. close, man. open, man. close, not operated, implausible |
|
||
| 2 | Driver's switch for rear left electric window1), 2) | autom. open, autom. close, man. open, man. close, not operated implausible not installed2) |
|||
| 3 | Driver's switch for rear right electric window1), 2) | autom. open, autom. close man. open, man. close not operated, implausible not installed2) |
|||
1) Part of door operating unit
2) Rear left and rear right for 2 door and Midi (4 door with electric front windows): not installed
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.