6-Cylinder 2V Engine

1999 Volkswagen GTI (1J1) V6-2.8L (AFP)SECTION 6-Cylinder 2V Engine



Editors Note:
Volkswagen does NOT provide a removing and installing procedure for the alternator on this vehicle.

Additional access to the alternator can be obtained in a number of ways:
- Removing the lock carrier. [1][2]Procedures
- Loosening the motor mount and slightly raising the motor.

Caution! Damage to wiring and hoses may occur if stretched or pulled tight while raising motor.

6-cylinder 2V Engine





1 - Bracket
2 - Washer
3 - Hex socket bolts

- M8 x 28 mm
- 25 Nm
4 - Hex bolts
- M8 x 85 mm
- 25 Nm
5 - Hex socket bolt
- M8 x 30 mm
- 25 Nm
6 - Hex bolts
- M3 x 18 mm
7 - Protective cap
8 - Bolts

- M4 x 25 mm
9 - Voltage Regulator (VR)
- Removing and installing Items , 5, 6
10 - Generator (GEN)
11 - Ribbed belt
12 - Hex bolt M8 x 85
- M8 x 85 mm
- 25 Nm
13 - Hex socket bolts
- M8 x 30 mm
- 25 Nm
14 - Tensioning- roller
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.