Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1998EUROVAN V6-2792CC 2.8L (AES)REPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINECYLINDER BLOCK ASSEMBLYSPECIFICATIONSCRANKSHAFT JOURNAL DIAMETER & LIMITS
1998 Volkswagen Eurovan V6-2792cc 2.8L (AES)
Crankshaft Journal Diameter & Limits
1998 Volkswagen Eurovan V6-2792cc 2.8L (AES)SECTION Crankshaft Journal Diameter & Limits
Tightening Specifications
Main Bearing Cap Bolt 30 Nm (22 ft lb) + 1/2 turn (180°)
NOTE:
^ Always replace
^ Two 90° turns to achieve the extra 1/2 turn is permissible
Dimensional Specifications
Crankshaft:
Axial Clearance
New 0.07 to 0.23 mm
Wear limit 0.30 mm
Radial Clearance With Plastigage
New 0.02 to 0.06 mm
Wear Limit 0.10 mm
NOTE: Do Not Rotate Crankshaft While Checking Radial Clearance
Crankshaft Journal Dimensions:
Main Journal 59.958 to 59.978 mm
Connecting Rod Journal 53.958 to 53.978 mm
NOTE: Reworking is not permitted!
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.