SYS.OK|MANUAL.DB● LIVE
1994 Volkswagen Jetta III GLX, Automatic, 096

Quick Lookups: Fluids

1994 Volkswagen Jetta III GLX, Automatic, 096SECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 4.00 OZS. 0.11 L PAG 46 S
Air Cond Refrigerant 1.78 LBS. 0.8 KG R-134a S
Automatic Transmission Fluid 3.20 QTS. 3.02 L Automatic Transmission Fluid DEXRON ATF DEXRON ATF is available as a replacement part. Container size 0.5l - ATF G 052 162 A1; Container size 1.0l - ATF G 052 162 A2. S
Brake Fluid N/A N/A DOT 4 Brake Fluid Fill between "max" and "min" lines on reservoir. S
Differential Gear Oil Automatic Trans 0.80 QTS. 0.75 L Synthetic Oil G 052 145 AI or G052 145 A2 S
Engine Coolant 6.50 QTS. 6.15 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water S
Engine Oil 4.20 QTS. 3.97 L SAE 5W-50, 10W-50 or 10W-60 (Below -20Deg.F to 90Deg.F), 5W-30 or 10W-40 (Below -20Deg.F to 60Deg.F), 10W-30 or 10W-40 (Below 0Deg.F to 60Deg.F), 15W-40, 15W-50, 20W-40 or 20W-50 (0Deg.F to Above 100Deg.F) S
Fuel Tank 14.50 GALS. 54.88 L Reserve tank capacity: 1.8 gal. S
Manual Transmission Fluid 4 Spd Trans 1.60 QTS. 1.51 L SAE 80 (Mil-L-2105) or API - GL-4, Synthetic Transmission Fluid G 50, SAE 75W-90 S
Power Steering Fluid N/A N/A VOLKSWAGEN Hydraulic Oil Fill between "max" and "min" lines on reservoir. S
Windshield Washer Fluid 4.50 QTS. 4.25 L Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.