Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
PCV System: Maintenance
Every 15,000 miles or every year, visually inspect rubber hose connected between air cleaner and valve cover for damage or plugging and clean hose.
Ensure that hose is clear by removing end at valve cover and blowing into hose. If hose is obstructed, remove hose and soak it in solvent. Scrub inside of hose with a long brush and dry with compressed air. When reinstalling hose, make sure all connections are tight.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.