Removal [12/2021 - 10/2022]: Procedure

2020 Toyota RAV4 XLE, AWDSECTION Procedure
  1. REMOVE MAP LIGHT ASSEMBLY 

    Refer to REMOVAL [11/2018 - ]

  2. REMOVE TELEPHONE MICROPHONE ASSEMBLY (for TMC Made) 
    1. Disconnect the connector.
      GTY1120814Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the claw and remove the telephone microphone assembly.
      GTY1120813Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE TELEPHONE MICROPHONE ASSEMBLY (for TMMC Made) 
    1. Disconnect the connector.
      GTY1120820Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the claw and remove the telephone microphone assembly.
      GTY1122103Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.