SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA201886 GT, STANDARD TRANSREPAIR AND DIAGNOSISELECTRICALCHARGING SYSTEMSGENERATOR (SERVICE INFORMATION)GENERATORDISASSEMBLY [06/2016 - ]PROCEDURE
2018 Toyota 86 GT, Standard Trans

Disassembly [06/2016 - ]: Procedure

2018 Toyota 86 GT, Standard TransSECTION Procedure
  1. REMOVE TERMINAL B 
    1. Remove the cover.
      GTY712359Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the nut and the terminal B.
      GTY712360Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE REAR COVER 
    1. Remove the rear cover.
      GTY712357Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE BRUSH ASSEMBLY 
    1. Remove the 2 bolts and brush assembly.
      GTY692055Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Socket wrench

      HINT: 

      To avoid damage to the slip ring, set a socket wrench or the like with appropriate size between the brush and slip ring.

  4. REMOVE IC REGULATOR 
    1. Remove the 3 bolts and IC Regulator.
      GTY712355Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.