Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Tire Repair Resources (T-SB-0187-12 REV2)
Reference number: T-SB-0187-12 REV2
Supersedes refnos: T-SB-0187-12, T-SB-0187-12 REV1
TIRE REPAIR RESOURCES
TECHNICAL SERVICE BULLETIN
| TOYOTA: | 2004 - 2018 4Runner, 86, Avalon, Avalon HV, C-HR, Camry, Camry HV, Corolla, FJ Cruiser, Highlander, Highlander HV, iA, iM, Land Cruiser, Matrix, Mirai, MR2 Spyder, Prius, Prius C, Prius PHV, Prius Prime, Prius V, RAV4, RAV4 EV, RAV4 HV, Sequoia, Sienna, Solara, Tacoma, Tundra, Venza, Yaris |
| SERVICE CATEGORY: | Suspension |
| SECTION: | Tire/Wheel |
| COPYRIGHT: | © 2018 Toyota, USA License Agreement TMS1002 |
APPLICABILITY
| YEAR(S) | MODEL(S) | ADDITIONAL INFORMATION |
|---|---|---|
| 2004 - 2018 | 4Runner, 86, Avalon, Avalon HV, C-HR, Camry, Camry HV, Corolla, FJ Cruiser, Highlander, Highlander HV, iA, iM, Land Cruiser, Matrix, Mirai, MR2 Spyder, Prius, Prius C, Prius PHV, Prius Prime, Prius V, RAV4, RAV4 EV, RAV4 HV, Sequoia, Sienna, Solara, Tacoma, Tundra, Venza, Yaris |
REVISION NOTICE
February 12, 2018 Rev2:
- Applicability has been updated to include 2015 - 2018 model year vehicles.
January 23, 2014 Rev1:
- Applicability has been updated to include 2013 - 2014 model year vehicles.
Any previous printed versions of this bulletin should be discarded.
TIRE REPAIR RESOURCES
Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles at speeds less than 55 mph with little or no damage to the tire.
The U.S. Tire Manufacturers Association (UTSMA) provides guidelines and recommendations for tire repair and replacement. It also provides information related to:
- Basic tire information
- Tire maintenance and safety
- Driver education, tire safety curriculum
Refer to the t3Portal, Home - Service Resources - Tire Maintenance and Safety - U.S. Tire Manufacturers Association (USTMA) for reference materials. Technicians should follow the USTMA provided guidelines, recommendations and repair protocols.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.