Customize Parameters

HINT: 

The following items can be customized.

1. CUSTOMIZING FUNCTION WITH THE TECHSTREAM 
   1. POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
      TILT & TELESCOPIC
      
      

      Display	Default	Contents	Setting
      Autoaway / Return function	ON	ON/OFF of the auto away / return function	ON/OFF

   2. AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)
      AIR CONDITIONER
      
      

      Display	Default	Contents	Setting
      Set Temperature Shift	Normal	Function to control the shifted temperature in relation to the displayed temperature	+2 C / +1 C / Normal / -1 C / -2 C
      Air Inlet Mode	Automatic	In case of turning the A/C ON to cool down the cabin quickly, this is the function to change the mode automatically to RECIRCULATION mode	Manual / Automatic
      Compressor Mode	Automatic	Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF	Manual / Automatic
      Compressor/Air Inlet DEF Operation	Link	Function to turn the A/C ON automatically linked with the FRONT DEF button when A/C is OFF	Normal / Link
      Foot/DEF Auto Mode	ON	Function to turn the airflow from FOOT / DEF ON automatically when AUTO MODE is ON	OFF / ON
      Foot/DEF Automatic Blow Up Function	ON	Function to change the blower level automatically when the defroster is ON	OFF / ON
      Ambient Temperature Shift	Normal	Function to control the shifted ambient temperature in relation to the displayed ambient temperature	+3 C / +2 C / +1 C / Normal / -1 C / -2 C / -3 C

   3. AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)
      AIR CONDITIONER
      
      

      Display	Default	Contents	Setting
      Ambient Temperature Shift	Normal	Function to control the shifted ambient temperature in relation to the displayed ambient temperature	+3 C / +2 C / +1 C / Normal / -1 C / -2 C / -3 C

   4. THEFT DETERRENT SYSTEM
      MAIN BODY
      
      

      Display	Default	Contents	Setting
      Warning by Horn	ON	Function that allows vehicle horns and theft deterrent horn to be used as warning device.	ON or OFF
      Passive Mode (Security system)	OFF	Passive arming mode is function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not inside vehicle and driver side door is closed. In passive arming mode, theft deterrent system will judge that theft is taking place and switch to alarm sounding state if one of following operations are not performed within 14 seconds (see entry delay below) after door is opened: Unlock any door by key or wireless operation Turn ignition switch ON	ON or OFF
      Entry Delay	14 s	Function that changes entry delay time (time before warning starts) for PASSIVE ARMING MODE	0 s / 14 s / 30 s
      Warning by Glass Broken Sensor*	ON	Function that turns glass breakage sensor ON/OFF. This function is only effective for vehicles with glass breakage sensor.	ON or OFF

      HINT: 

      *: w/ Glass Breakage Sensor

   5. LIGHTING SYSTEM
      MAIN BODY
      
      

      Display	Default	Contents	Setting
      I/L ON / ACC OFF	ON	Illuminates light when ignition switch turned to ACC (Room light illuminated when interior light switch set to DOOR)	ON / OFF
      Lighting Time	15s	Changes illumination duration after door closure (It will quickly fade out when turning ignition switch ON)	7.5s / 15s / 30s
      I/L ON / Unlock	ON	Function to light up room light when unlocking with door key cylinder (Room light illuminated when interior light switch set to DOOR)	ON / OFF
      Light OFF Delay	30s	Function to continue illuminating headlight for certain period of time after closing all doors with ignition switch turned from ON to OFF under condition that light control switch is at HEAD or AUTO with the headlight ON	OFF / 30s / 60s / 90s
      Sensitivity	NORMAL	Function to adjust ambient light sensitivity of automatic light control system*1	LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
      Disp Ex ON Sen	NORMAL	Function to change level of ambient light at which system dims lights such as combination meter indicator light, A/C indicator light and clock light*2	LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
      Disp Ex OFF Sen	NORMAL	Function to change level of ambient light at which system cancels dimming of lights such as combination meter indicator light, A/C indicator light and clock light*3	LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2

      HINT: 

      The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

      *1
      
      

      System Setting	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Setting	DARK2	DARK1	NORMAL	LIGHT1	LIGHT2

      HINT: 

      When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

      *2
      
      

      System Setting	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Setting	DARK2	DARK1	NORMAL	LIGHT1	LIGHT2

      HINT: 

      When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

      *3
      
      

      System Setting	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Setting	DARK2	DARK1	NORMAL	LIGHT1	LIGHT2

      HINT: 

      When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

   6. POWER DOOR LOCK CONTROL SYSTEM
      MAIN BODY
      
      

      Display	Default	Contents	Setting
      Unlock Key Twice	ON	Function that unlocks only driver side door when driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For OFF setting, turning it once unlocks all doors.	ON/OFF
      Auto lock	OFF	Function that locks all doors when vehicle speed reaches a certain level.	ON/OFF
      Auto Lock/Shift	ON	With engine running and all doors closed, function that locks all doors when lever is moved to P from any position other than P.	ON/OFF
      Auto Unlock/Shift	ON	Function that unlocks all doors when lever is moved to P from any position other than P while ignition switch is ON.	ON/OFF
      All Unlock/Open-Close	OFF	Function that unlocks all other doors when opening driver door within 10 seconds after turning ignition switch ON.	ON/OFF

   7. WIRELESS DOOR LOCK CONTROL SYSTEM
      MAIN BODY
      
      

      Display	Default	Contents	Setting
      Hazard Answer Back	ON	When LOCK switch on transmitter is pressed, all hazard warning lights illuminate once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice.	ON / OFF
      Wireless Buzzer Resp	ON	Function that makes wireless buzzer sound for answer-back when transmitter LOCK / UNLOCK switch is pressed.	ON / OFF
      Open Door Warning	ON	If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds.	ON / OFF
      Wireless Control	ON	ON / OFF of wireless door lock function.	ON / OFF
      Panic Function	ON	Operates security alarm when PANIC switch on transmitter is continuously pressed for 1 second.	ON / OFF
      Unlock 2 Operation	ON	Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.	ON / OFF
      Wireless Auto Lock	ON	Function to control automatic relocking of doors after unlocking with wireless door lock function.	ON / OFF
      Auto Lock Time	30 seconds	Function to change time until relocking after unlocking.	60 seconds/30 seconds

   8. METER / GAUGE SYSTEM
      WARNING:
      
      

      Display (Item)	Default	Contents	Setting
      Key Remind Volume	Large	To change volume of key reminder buzzer	Large / Medium / Small
      Key Remind Sound	1200	To change frequency of key reminder buzzer	600 / 900 / 1200
      P-Seatbelt Warning Buzzer	ON	To change setting of passenger side seat belt warning buzzer	ON / OFF

   9. SLIDING ROOF SYSTEM
      SLIDING ROOF
      
      

      Display (Item)	Default	Contents	Setting
      Door Key Related Open	ON	Function to manually open sliding roof linked with power window if holding driver side door key for 3 seconds or more to unlock position when ignition switch is OFF	ON / OFF
      Door Key Related Close	ON	Function to manually close sliding roof linked with power window if holding driver side door key for 3 seconds or more to lock position when ignition switch is OFF	ON / OFF
      Door Key Related Operation	SLIDE	Function to select tilt up or slide open of manual sliding roof operation linked with power window activated by holding driver side door key for 3 seconds or more to unlock position when ignition switch is OFF	TILT / SLIDE

   10. POWER WINDOW CONTROL SYSTEM (w/Jam Protection Function)
       POWER WINDOW
       
       

       Display (Item)	Default	Content	Setting
       Door Key P/W Up	ON	Function that raises the driver and front passenger side power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the lock position for more than 2.3 seconds.	ON/OFF
       Door Key P/W Down	ON	Function that lowers the driver and front passenger side power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the unlock position for more than 2.3 seconds.	ON/OFF

2. CUSTOMIZING FUNCTION WITH MULTI-INFORMATION DISPLAY (w/ Multi-information Display) 
   1. Using the SETUP switch and SELECT switch, the following functions can be customized through the multi-information display. Refer to the illustration below.
      • Unit setting
      • Wireless door lock control system (answer-back function, automatic lock function, 2-step unlock function)
      • Power door lock control system (automatic door lock function, automatic door unlock function)
      • Lighting system (auto light turn off function)
      • Default setting (customize setting cancel function)
      Fig 1: Customizing Function With Multi-Information Display (1 Of 4)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002